A specially formulated advanced “NANO” composite coating combined with our specialised in-situ pipeline application techniques, which results in an ultra-slick, low-friction; abrasion resistant internal surface for increased pipeline efficiency. 

Nano Coating is the process of applying nanostructures to surfaces for the purpose of sealing them on a nanoscopic scale. This coating layer thickness in typically between 1-100 nanometers. It creates a self-organised, hydrophobic (water repelling) layer of nanoscale thickness, and through covalent and chemical bonding, becomes one with the substrate itself. This coating is applied very easily using a ‘Pig-batch’ method, then dry air purging is carried out to cure the coating.

Rougher pipes cause large pressure drops, higher energy input and reduced capacity. With PC Nano Coating the smoother surface creates laminar flow at the internal boundary, thus helping to achieve maximum flow capacity.

Advantages of PC Nano Coating

• Advanced nanocomposite coating is unlike any traditional coating commercially available

• Proprietary speciality formulated coating with manufacturing capabilities in US and Singapore

• Superior specialised application expertise and techniques that can be performed in-place on long pipeline sections of any diameter

• Meets International specification API 5L2 for factory internal coating of gas transmission pipelines

• Minimal surface preparation and out-of-service time

• Abrasion resistant, not damaged by routine pigging and ILI inspection tools

• Predictive and measurable performance increases can be estimated, and actual results documented after line put back in service. 

Find Out More

To find out more about these products, local costs and availability use the button below to contact your nearest regional office.