Admin Services

Glenbeg House

139 Laleham Road

Staines upon Thames

Middlesex  TW18 2EG


T: 00 44 207 118 3477

F: 00 44 207 118 3478

Send email

Nigeria Office

Port Harcourt Office:

144 Trans Amadi Industrial Estate

Port Harcourt


T: 00 234 805 330 0334

Send email

Dublin Office

3rd Floor

Ulysses House

Foley Street

Dublin 1


T: +353 1888 1114

Send email

Pakistan Office

104A, Street 91

Sector G-11/3



T: 051 2221750

F: 051 2221695

Send email

Kazakhstan Office

Production Chemical

Near East Limited

Microdistrict 26

Building 6 App 48

Aktau, Kazakhstan

T:+7 7781882226

Send email

Uganda Office

Plot 2, 4th Street Industrial Area



PO Box 2537, Kampala, Uganda

T:  +44 207 118 3477

F: +44 207 118 3478

Send email

UAE Office

Production Chemical Limited L.L.C

Al Murjan 1, Flat No: 107,

Al Rashdiya, Opp. ADCB Bank Ajman, UAE P.O. Box: 17224

T: + 44 (0) 207 118 3477

F: + 44 (0) 207 118 3478

Send email

PRODUCTION CHEMICAL GROUP © 2017 All rights reserved

New Chemistries - PC Inhib 130

PC Inhib 130

A desalting additive: is a highly oil dispersible intermediate-additive which can be used on its own or blended as a major component with other demulsifier - desalting chemicals for use in oilfield and refinery desalting operations. Crude oil quality is related to production techniques, higher saline waters, sulphur, nitrogen, asphaltenes, fine solids and paraffin contents.

A desalting chemical has to be able to overcome the polar crude components and contaminants that attract and hold back salts within micro emulsions in the crude oil. Poor desalting can affect the residual salt in many product streams, poisoning catalysts in downstream reformer and FCC units and corrosion in overheads systems. Residual salt, solids and other chlorides in finished product streams are corrosive to engine metallurgies. Salts and solids in the residuum result in high ash contents and degrade the product. Salt when steam hydrolyzed produce the halogen acids. These, if untreated, can negatively affect most dry steam, and wet steam and product condensates areas in the overheads.  

PC Inhib 130 is a scientifically designed desalting additive package that is novel in its desalting mechanism. It can be used in formulations for all types of crudes and blend slates of crude oils with smaller percentages of the off specifications product streams, slops re-run, bottom fractions, tank bottoms and waste lube oils.




For information on any of our products or services please use our enquiry form or contact your nearest regional office.



Specialty Chemicals for the Energy and Petroleum Industries